Purely Arribuh: Assessment Cisco Program Edit

Showing posts with label Assessment Cisco Program Edit. Show all posts

Assessment Cisco Program Edit

shout box

-Due to a warning from CCNA Curriculum Lead & Coordinator, questions and answers for CCNA version 4.0 needs to be removed from this blog...-

To Whom it May Concern,
This e-mail is being sent to you regarding your blog at http://www.loradz.blogspot.com. This blog is violating Cisco's Terms of Service. Please take a look at our Cisco Terms and Conditions at http://www.cisco.com/web/siteassets/legal/terms_condition.html . You are violating rule #2.

"ALL CONTENTS ON THIS SITE ARE PROTECTED BY COPYRIGHT. EXCEPT AS SPECIFICALLY PERMITTED HEREIN, NO PORTION OF THE INFORMATION ON THIS WEB SITE MAY BE REPRODUCED IN ANY FORM, OR BY ANY MEANS, WITHOUT PRIOR WRITTEN PERMISSION FROM CISCO. VISITORS OR USERS ARE NOT PERMITTED TO MODIFY, DISTRIBUTE, PUBLISH, TRANSMIT OR CREATE DERIVATIVE WORKS OF ANY MATERIAL FOUND ON THIS SITE FOR ANY PUBLIC OR COMMERCIAL PURPOSES."

Your blog has been reported to Cisco. Further more, you will be banned and not be allowed to test for your CCNA, CCNP, or any other certification for Cisco ever again. REMOVE your blog, and all the answers to the CCNA Modules from your website immediately. Failure to do so will result in your account being banned, and any future registrations to the NetAcad website, or any CCNA Exam will not be allowed to you.

- Mark S.
CCNA Curriculum Lead & Coordinator

Cisco Networking Academy Program

CCNA 1 Networking Basics (Version 3.1)

CISCO CCNA 1 - Module 1 Exam Answers

CISCO CCNA 1 - Module 2 Exam Answers

CISCO CCNA 1 - Module 3 Exam Answers

CISCO CCNA 1 - Module 4 Exam Answers

CISCO CCNA 1 - Module 5 Exam Answers

CISCO CCNA 1 - Module 6 Exam Answers

CISCO CCNA 1 - Module 6/7 Exam Answers

CISCO CCNA 1 - Module 7 Exam Answers

CISCO CCNA 1 - Module 8 Exam Answers

CISCO CCNA 1 - Module 9 Exam Answers

CISCO CCNA 1 - Module 9/10 Exam Answers

CISCO CCNA 1 - Module 10 Exam Answers

CISCO CCNA 1 - Module 11 Exam Answers

CISCO CCNA 1- Practice Final Answers

CISCO CCNA 1- Final Exam Answers

CCNA 2 Router and Routing Basics (Version 3.1)

CISCO CCNA 2 - Module 1 Exam Answers

CISCO CCNA 2 - Module 2 Exam Answers

CISCO CCNA 2 - Module 3 Exam Answers

CISCO CCNA 2 - Module 4 Exam Answers

CISCO CCNA 2 - Module 5 Exam Answers

CISCO CCNA 2 - Module 6 Exam Answers

CISCO CCNA 2 - Module 7 Exam Answers

CISCO CCNA 2 - Module 8 Exam Answers

CISCO CCNA 2 - Module 9 Exam Answers

CISCO CCNA 2 - Module 10 Exam Answers

CISCO CCNA 2 - Module 11 Exam Answers

CISCO CCNA 2 - Voucher Exam

CISCO CCNA 2 - Practice Exam Answer

CISCO CCNA 2 - Final Exam Answers

CCNA 3 Switching Basics and Intermediate Routing (Version 3.1)

CCNA 4 Switching Basics and Intermediate Routing (Version 3.1)

CISCO CCNA 4 - Voucher Exam

CCNA 1 (Version 4.1)

CCNA 2 (Version 4.1)

CCNA 3 (Version 4.1)

Discover 1 (Version 4.1)

Discover 2 (Version 4.1)

Exploration 4.0 (Version 4.1)

»» read more

1. Which of the following descriptions are true regarding the management connections on a Cisco router? (Choose three.)
• They are non-network connections.
• They are used to connect the router to the rest of the production network.
• They are synchronous serial ports.
• They are used for initial router configuration.
• They are asynchronous serial ports.
• They are accessed using their assigned IP address.

2. The console port can be used for which of the following? (Choose three.)
• debugging
• password recovery
• routing data between networks
• troubleshooting
• connecting one router to another

3. Which of the following describes the function of a WAN?
• connects peripherals in a single location
• connects multiple networks in a single building
• provides connectivity on a LAN
• provides connectivity over a large geographic area

4. An internetwork must include which of the following? (Choose three.)
• switching
• static addressing
• IETF standardization
• dynamic or static routing
• consistent end-to-end addressing

5. ABC Company just purchased three new routers to start their company network. Which items are needed to establish a terminal session between a PC and the router for the initial configuration? (Choose three.)
• straight-through cable
• terminal emulation software
• rollover cable
• RJ-45 to DB-9 connector
• V.35 cable

6.

Terminal emulation software, such as HyperTerminal, can be used to configure a router. Which of the following HyperTerminal options shown in the graphic are correctly set to allow configuration of a Cisco router? (Choose three.)
• bits per second
• data bits
• parity
• stop bits
• flow control

7. Which of the following devices are used in the construction of a WAN? (Choose three.)
• hubs
• routers
• communication servers
• transceivers
• modems
• multi-port repeaters

8. Which of the following are functions of RAM? (Choose three.)
• contains startup configuration file
• stores routing table
• holds fast switching cache
• retains contents when power is removed
• stores running configuration file

9. Why is a console connection to a router or switch preferred when troubleshooting? (Choose two.)
• can be accessed remotely
• does not depend on network services
• displays startup and error messages by default
• does not require special components

10. Which basic components do a router and a standard desktop PC have in common? (Choose three.)
• CPU
• hard drive
• input/output interfaces
• keyboard
• monitor
• system bus

11. During the initial configuration of a 2600 series Cisco router, which cable is required for connecting a PC to the console port?
• twisted
• crossover
• rollover
• straight

12. A router is composed of many internal components. Which of the following components stores a copy of the router's configuration file?
• metal-oxide memory
• read only memory
• flash memory
• non-volatile random access memory

13. What contains the instructions that a router uses to control the flow of traffic through its interfaces?
• packet configuration
• configuration files
• flash memory
• internal components

14. Several Ethernet hosts on a LAN need the gateway services of a Cisco 2500 series router. Which of the following would be needed to physically connect a router to all of the hosts on the LAN? (Choose two.)
• a crossover cable between the transceiver on a router and a switch
• crossover cables between a switch and hosts on a LAN
• a straight-through cable between the auxiliary port on a router and a switch
• a rollover cable between the console port on a router and a switch
• straight-through cables between a switch and hosts on a LAN
• a straight-through cable between the transceiver on a router and a switch

15. Which router component holds the configuration file when power is lost?
• volatile random access memory
• read only memory
• non-volatile random access memory
• flash memory

16. Which of the following layers of the OSI model are incorporated in WAN standards? (Choose two.)
• physical layer
• application layer
• transport layer
• data link layer
• session layer

17. Which of the following are true regarding router interfaces? (Choose three.)
• provide temporary memory for the router configuration files
• connect the router to the network for packet entry and exit
• can be on the motherboard or a separate module
• hold the IOS image
• connect the router to LANs and WANs

18. Which of the following tasks can be accomplished through a management connection on a router? (Choose three.)
• troubleshooting problems
• monitoring the system
• capturing LAN data packets
• configuring the router
• routing data packets

19. What do routers use to select the best path for outgoing data packets?
• ARP tables
• bridging tables
• routing tables
• switching tables

20. Which of the following are functions of NVRAM? (Choose two.)
• stores the routing table
• retains contents when power is removed
• stores the startup configuration file
• contains the running configuration file
• stores the ARP table

21. Select the statements that correctly describe flash memory in a 2600 series router? (Choose two.)
• holds the startup configuration by default
• can be upgraded with single in-line memory modules
• stores Cisco IOS software images
• stores routing table information by default
• maintains the only copy of an IOS image after the router is booted

Download CCNA 2 - Module 1 Exam

»» read more

CCNA 2 - Module 3 Exam

1. Why is it important to create standards for network consistency? (Choose three.)
• reduces network complexity
• increases unplanned downtime
• limits unplanned downtime
• increases bandwidth by regulating networking performance
• limits events that may impact network performance

2. Select the recommended locations to save a running-config file. (Choose three.)
• all network hosts
• network server
• floppy disk
• TFTP server
• server that is not on the network

3. Router names are associated with IP addresses. What is the name of the table that is created by this association?
• IP table
• SAP table
• ARP table
• MAC table
• HOST table
• RARP table

4. Which commands display information about the IOS or configuration files stored in router memory? (Choose three.)
• Router# show ram
• Router# show flash
• Router# show hosts
• Router# show history
• Router# show version
• Router# show startup-config

5.

The serial connection shown in the graphic needs to be configured. Which configuration commands must be made on the Sydney router to establish connectivity with the Melbourne site? (Choose three.)
• Sydney(config-if)# ip address 201.100.53.2 255.255.255.0
• Sydney(config-if)# no shutdown
• Sydney(config-if)# ip address 201.100.53.1 255.255.255.224
• Sydney(config-if)# clock rate 56000
• Sydney(config-if)# ip host Melbourne 201.100.53.2

6. What are the default settings for a serial interface? (Choose three.)
• DTE
• DCE
• shutdown
• no IP address
• clock rate 56000
• encapsulation ARPA

7. A network administrator wants to assure that any password that permits access to the privileged EXEC mode is not shown in plain text in the configuration files. Which commands will accomplish this task? (Choose two.)
• Router(config)#enable cisco secret
• Router(config)#enable cisco
• Router(config)#service password-encryption
• Router(config)#enable secret cisco
• Router(config)#encrypt-all cisco
• Router(config)#service encryption-password

8. What will be the response from the router after the command, "router(config)# hostname portsmouth" is entered?
• portsmouth#
• portsmouth(config)#
• invalid input detected
router(config-host)#

• hostname = portsmouth
portsmouth#

• ? command not recognized
router(config)#

9. Select the correct sequence of commands that will configure "Engineering LAN" as the interface description on the Ethernet0 interface.
• Router# configure terminal
Router(config)# interface e0 description Engineering LAN

• Router# configure terminal
Router(config)# interface e0
Router(config-if)# description Engineering LAN

• Router# configure terminal
Router(config)# interface e0
Router(config-if)# interface description Engineering LAN

• Router# configure terminal
Router(config)# description Engineering LAN

10. Select the commands that will store the current configuration file to a network TFTP server? (Choose two.)
• Router# copy run tftp
• Router# copy tftp run
• Router# copy running-config tftp
• Router# copy tftp running-config
• Router(config)# copy running-config tftp
• Router(config)# copy tftp running-config

11. Passwords can be used to restrict access to all or parts of the Cisco IOS. Select the modes and interfaces that can be protected with passwords. (Choose three.)
• VTY interface
• console interface
• Ethernet interface
• secret EXEC mode
• privileged EXEC mode
• router configuration mode

12. What is the default state of the interfaces on a router?
• up, line protocol down
• down, line protocol down
• adminstratively down, line protocol down
• up, line protocol up

13. Which command turns on a router interface?
• Router(config-if)# enable
• Router(config-if)# no down
• Router(config-if)# s0 active
• Router(config-if)# interface up
• Router(config-if)# no shutdown

14. A telnet session can be established when using the IP address of a router but not the name of the router. Which of the following is the most likely cause of the problem?
• an incorrect host table entry
• an incorrect ARP table entry
• an incorrect routing table entry
• an incorrect protocol configured
• an incorrect subnet mask

15. Select the interface descriptions that provide the most appropriate information. (Choose two.)
• circuit number
• host IP address
• telnet password
• number of hops between routers
• purpose and location of the interface

16. Select the commands necessary to remove any existing configuration on a router. (Choose two.)
delete flash
• erase startup-config
• erase running-config
• restart
• reload
• delete NVRAM

17. An IP network is to be added to a router Ethernet interface. What steps must be performed to configure this interface to allow connectivity to the hosts on this LAN? (Choose two.)
• Enter the command no shutdown.
• A password must be set on the interface.
• The interface DCE clock rate must be set.
• The interface must be configured for virtual terminal access.
• The interface must be configured with an IP address and subnet mask.
• The router must be put in setup mode in order for the interface to be configured.

18. Which command sequence will permit access to all five router virtual terminal lines with a password of cisco?

• Router(config-line)#config telnet
Router(config-line)# line vty 0 5
Router(config-line)# password cisco

• Router(config)# line vty 0 4
Router(config)# password cisco

• Router(config)# line vty 0 4
Router(config-line)# password cisco
Router(config-line)# login

• Router(config-line)# config telnet
Router(config-line)# password cisco
Router(config-line)# sessions 0 4

19. Which statements are true regarding the recommended use of login banners? (Choose two.)
• They should be used to display information regarding system changes or maintenance.
• They should be used to display warnings to unauthorized users.
• They should be used to display welcome messages prior to login.
• They should be seen only by system administrators.
• They should provide confirmation of incoming IP addresses.

20. Which are valid router prompts? (Choose three.)
• Router(privileged)#
• Router(config)#
• Router(command)#
• Router(config-router)#
• Router(config-if)#
• Router(exec)#

21. What is the effect of the command ip host HQ 192.1.1.1?
• permits a ping to 192.1.1.1 with the command ping HQ
• assigns the description HQ to the interface with the ip address 192.1.1.1
• renames the router as HQ
• defines a static route to the host 192.1.1.1
• configures the remote device HQ with the ip address of 192.1.1.1

22. What must be configured to establish a serial link between two routers that are directly connected?
• a clock rate on the DTE interface
• a no clock rate command on the DTE interface
• no configuration is required
• a clock rate on the DCE interface

»» read more

CCNA 2 - Module 2 Exam

1. Cisco IOS software is separated into two levels as a security feature. What are those two levels? (Choose two.)
• global
• privileged
• local
• user
• interface

2. When the router output is being viewed through a terminal program, which statements are true regarding the --More-- prompt at the bottom of the router display? (Choose two.)
• Press the Spacebar to display the next line.
• Press the Spacebar to view the next screen.
• Press the PgDn key to view the next screen.
• Press the Enter key to display the next line.
• Press the Enter key to view the next screen.

3. Which command takes precedence if the commands enable password and enable secret are both configured on a router?
• enable password
• enable secret
• Neither. They are both enabled.
• Neither. They cancel each other out.

4. What baud rate needs to be configured on terminal emulation software to allow a connection to the console port of a router?
• 2400
• 4800
• 9600
• 14200
• 38400

5. What information about the router and its startup process can be gathered from the output of the show version command? (Choose three.)
• the last restart method
• the command buffer contents
• the amount of NVRAM and FLASH used
• the configuration register settings
• the location from where the IOS loaded

6. Which keystroke is used to move to the beginning of a command line?
• Ctrl-A
• Ctrl-B
• Esc-A
• Esc-B
• Ctrl-C
• Ctrl-Z

7. What does the command sh? return as output if issued at the Router# prompt?
• all show commands allowed in privileged mode
• all commands beginning with the letters sh
• an incomplete command error message
• an invalid command error message

8. Which tasks can be accomplished by using the command history feature? (Choose two.)
• View a list of commands entered in a previous session.
• Recall up to 15 command lines by default.
• Set the command history buffer size.
• Recall previously entered commands.
• Save command lines in a log file for future reference.

9. What information does the name of the IOS file provide to the network administrator? (Choose three.)
• the amount of NVRAM required to run the image
• he hardware platform the image runs on
• the various software platforms the image can run on
• special features and capabilities of the image
• the bandwidth supported by the IOS
• where the image executes from and if it has been compressed

10. Which of the following is the correct flow of routines for a router startup?
• load bootstrap, load IOS, apply configuration
• load bootstrap, apply configuration, load IOS
• load IOS, load bootstrap, apply configuration, check hardware
• check hardware, apply configuration, load bootstrap, load IOS

11. Which tasks can be performed in the ROM monitor mode? (Choose two.)
• recover from system failures
• create startup configuration files
• recover from lost passwords
• configure IP addresses on all router interfaces
• perform high level diagnostics

12. Which of the following statements concerning router interface modes are correct? (Choose three.)
• User EXEC mode provides commands to monitor router operation.
• Privileged EXEC mode only provides commands to change or configure router operation.
• Password protected configuration modes can be accessed from either user EXEC or privileged EXEC modes.
• On a router with the name Core1, the prompt indicating privileged EXEC mode is Core1#.
• The command to enter privileged EXEC mode is Router# enable.
• A username and password may be required to enter privileged EXEC mode.

13. Under what conditions does the router enter setup mode? (Choose three.)
• immediately after issuing the command Router#erase start
• after issuing the command Router#setup
• during the initial configuration of a router
• after deleting the backup configuration and reloading the router
• after deleting the running configuration

14. A network administrator needs to configure a router. Which of the following connection methods requires network functionality to be accessible?
• console
• AUX
• Telnet
• modem

15. After the active IOS image has been loaded into RAM from flash memory, which commands could be used to display the file name of the active IOS? (Choose two.
• Router# show IOS
• Router# show flash
• Router# show nvram
• Router# show version
• Router# show startup-config
• Router# show running-config

16. What is the default sequence for loading the configuration file?
• NVRAM, FLASH, ROM
• FLASH, TFTP,CONSOLE
• NVRAM, TFTP, CONSOLE
• FLASH, TFTP, ROM

17. Which connection method can be used to perform the initial configuration of a router?
• use a serial connection of a computer connected to the console port of a router
• telnet to the router through a serial port
• use a vty port through the Ethernet interface
• use a modem connected to the AUX port of the router

18. Which keystrokes can be used to return to the privileged mode from the interface configuration mode?
• Ctrl-P
• Ctrl-Shift-6, then X
• Ctrl-Z
• Esc

19.

Which of the following identifies the correct items needed to initially configure a router?
• 1) DB-9-to-RJ-45 on the PC's serial port
2) a straight through cable
3) the router's console port

• 1) PC's Ethernet port
2) a crossover cable
3) the router's Ethernet port

• 1) DB-9-to-RJ-45 on the PC's serial port
2) a rollover cable
3) the router's Ethernet port

• 1) PC's Ethernet port
2) a rollover cable
3) the router's console port

• 1) DB-9-to-RJ-45 on the PC's serial port
2) a rollover cable
3) the router's console port

• 1) PC's Ethernet port
2) a rollover cable
3) the router's Ethernet port